High Performance Conveyor Belting

Monday, January 28, 2019

Pipe Belt Job Complete .... 18, 264 ft.

Pipe Belt- How to move Coal from the Port to the Plant without spillage or dust // Project Completed:

Working in Conjunction with our Field Service Authorized Splice and Mechanical Partner -the excellent group from American Mechanical Services based out of Chicago- we embarked on a Joint Project to supply and install 18,264 ft. of Steel Cable Pipe Conveyor Belt for a Power Generation facility. 

Logistically, it was a challenge - (13) rolls -43,500# each - had to be shipped by Container to the Port Facility, unloaded and then positioned for the physically tough job of pulling the old Pipe Belt off, the new Pipe Belt on one roll at a time and vulcanizing each connection to end up with about a 3.5 mile continuous Pipe Belt Delivery System.

This is the Port Unloading System 
( unloads Coal and then thru a few transfer systems it ends up on the Pipe Belt
for the "continuous closed" transport to the Generating Plant )

                         Unloading the first of (13) 43,500# rolls from the Container to the Dock


  Rolls were shipped on special cassette configured rolls to allow for container height restrictions


                      CONVEYOR BELT 

  HAMAHEAT - the Leader in Heat Resistant Conveyor Belt

            >  Handles loads up to 750 Degrees  F

            >  Superior Abrasion Resistance

            >  Reliable Vulcanized Splices

            > Manufactured to Width with Molded Edges

            > Lower Cost Per Tonnage Performance

   Yokohama has dedicated years of research to delivery key breakthroughs in heat tolerance, abrasion resistance and splice adhesion when it comes to the development of their High Heat application  Conveyor Belt Technology. 

            HAMAHEAT Conveyor Belts 

              > Resists hardening and cracking
              > Maintain cover tensile strength 5 times greater
                   than the two nearest competitors
              > Improved cover performance under extreme heat
                   conditions extends life and minimizes carry back
              > Premature belt failure due to cracking and blistering
                   is greatly diminished with this high end technology
              > Resists cupping and curling which leads to better
                   tracking, and molded edges reduce delamination
                   and the typical loss in edge integrity


                    Call the Belt Doctor : 269-830-6870

                   To Check on Availability and Pricing 




                      Advanced Rubber Technologies 
                      CONVEYOR BELT DIVISION
           Division of American Chemical Technologies


    Gary Hanson - VP/ General Manager Conveyor Belt Division

    Ross Kovanda - VP / American Chemical Technologies


              Conveyor Belt Warehouse  > Gary Indiana

             Corporate Office  > Fowlerville , Michigan